| ●Beaning Selection & Calculation |
| ●SF-1 Self-lubricating Bearings(SF-10,SF-11,SF-12,SF-13,SF-14,SF-15,SF-16,SF-17,SF-18,SF-19) |
| ●SF-2 Prelubricated Bearings(SF-20,SF-21,SF-22,SF-23) |
| ●SF-3 Bimetal Bearings(SF-30,SF-31,SF-32,SF-33,SF-34) |
| ●SF-4 Wrapped Bronze Bearings(SF-40,SF-41,SF-42) |
| ●SF-5 Solid-lubricant Bearings(SF-50,SF-51,SF-52,SF-53,SF-54,SF-58,SF-59) |
| ●SF-6 Ball Retainer Bearings(SF-60,SF-61,SF-62) |
| ●SF-7 Oil-retaining Bearings(SF-70,SF-71) |
| ●SF-8 Point-lubricating Bearings(SF-80) |
| ●Wrapped Bearings Installation |
|
| |
| Products
>> |
|
|
|
SF-17 Anti
corrosion stainless steel bearing
|
|
Application characteristics：It's based on stainless
steel plate which is anti-corrosive, through special workmanship,
the compound with PTFE layer mainly is located on the surface,
it is with the characteristics of wear-resistant, acid-resistant,
alkalirestant and seawter-resistant. It's used in flow meters,
pumps and valves of chemical equipments.
Provide standardized products：Cylindrical bushes P3、P7,
thrust washers P6、P10,flat strip material P6.
Provide non-standardized products：Cylindrical bushes, thrust
washers, flat strip material, half Bearing, wear plate,
SF-17 with steel bush.
|
SF-18 Bronze
mesh self-lubricating bearing
|
|
Application characteristics：It's a composite
material with bronze wire mesh as frame and calendered with
a film if filled polyterafluoroethylene. This is of low friction
and low wear, surfaces, and can fulfill the ideal aim of no
noise, no lubricating, no maintenance and no pollution. At
present, this is applied in those mechanical elements under
relatively low load and low speed. Such as in textile machines,
sphenical bearings. Automobile door hinge and the operating
rod for cars.
Provide standardized products：
可供非标产品：直套，翻边轴套，止推垫片，板材，轴瓦。
Provide non-standardized products：Cylindrical bushes, flanged
bushes, thrust washers, flat strip material, half bearing.
|
SF-19 PTFE
soft strip
|
|
Application characteristics：It's a kind of material
made of filled PTFE which is mold pressed and sintered. The
mass is than cut into thin strip by partcular technipue. The
strip is soft and elastic, and is of low friction and low
wear. It can work with or without oil, and so is the best
choice for bushes and piston rings of oil dampers in automobiles
and motorcycles. At present, SF-19 material is various famous
cars in our country. The friction is low, the cylind surface
is prolonged working period. During installation, the strip
can be easily pushed into the cylinder together with the piston.
Provide standardized products：
Provide non-standardized products：PTFE soft strip.
|
|
|
